基于应变梯度理论的微尺度蜂窝等效模量计算方法

本文提出了一种新的能够计及尺度效应的微纳米蜂窝等效模量的计算方法。将一种单参数应变梯度理论引入到本构方程当中,并基于能量等效原理推导了蜂窝面内等效模量地计算公式。算例分析表明,本文方法能够有效地计及尺度效应对蜂窝等效模量的影响。尺度效应与胞壁厚度和长度的值都有关,当胞壁厚度较小时,尺度效应显著,本文方法预测的模量会明显高于传统方法;而当胞壁厚度较大时,尺度效应变得微弱乃至可以忽略不计。但如果胞壁的长度/厚度比很大,则面内等效模量会趋近于0,此时是否考虑尺度效应意义不大。     

Synthesis of 29H,31H-phthalocyanine and chloro (29H,31H-phthalocyaninato) aluminum derivatives showed anti-cancer and anti-bacterial actions

Continuous administration of most chemotherapeutic drugs can induce different types of side effects. There has been growing interest in exploring an alternative approach to synthesizing compounds that are most effective and have fewer side effects. We synthesized 29H,31H-Phthalocyanine, and Chloro (29H,31H- phthalocyaninato) aluminum at low temperatures using lithium in the present study with diisopropylamide as the nucleophile. The physical characteristics of 29H,31H-Phthalocyanine, and Chloro (29H,31H- phthalocyaninato) aluminum were confirmed by FT-IR method, XRD, SEM, and the impact of these compounds on human colorectal carcinoma (HCT-116) and human cervical cells (HeLa) was examined. Treatment with 29H,31H-Phthalocyanine significantly decreased cancer cell growth and proliferation, as determined by MTT and DAPI staining analysis. In contrast, Chloro (29H,31H- phthalocyaninato) aluminum treatment did not show any inhibitory action on colon or cervical cancer cells. We also calculated the inhibitory concentration (IC50) of 29H,31H-Phthalocyanine, which was 30 µg/ml (HCT-116) and 33 µg/ml (HeLa cells). The antibacterial effectiveness of 29H,31H-Phthalocyanine, and chloro (29H,31H- phthalocyaninato) aluminum was studied using Enterococcus faecalis (E. faecalis). The CFU (colony frequency unit) assay confirmed significant activity against the test bacterium after treatment with 29H,31H-Phthalocyanine. However, no activity was seen upon treatment with chloro (29H,31H- phthalocyaninato) aluminum against E. faecalis.     

First principles investigations of Fe,Co, Ni in model honeycomb carbon networks

The behaviors of ferromagnetic transition metals of the first period: Fe, Co and Ni are examined within density functional theory calculations in two dimensional carbon extended networks using model structure LiC₆. Around geometry optimized structures, the energy-volume equations of states considering non magnetic and spin polarized configurations established ferromagnetic ground states with magnetizations –reduced with respect to the metals’– of 2 μ_B for FeC₆ and 1 μ_B for CoC₆ while no magnetic solution could be identified for NiC₆. In the D_6h point group of the P6/mmm space group l_m decomposition of the d states results with increasing energy into doublet state E_1g with d(x²-y²) and d(xy); singlet state A_1g d(z²) and doublet state E_2g d(xz) and d(yz) lying on E_F and responsible of the onset of magnetic moments. This was mirrored via molecular orbital approach with a construct of Fe embedded between two extended carbon networks thus validating the model structure proposed for TC₆ compounds. The 100% polarization in one spin channel allows proposing potential uses in spintronics applications.     

Preparation of a novel bentonite intercalation composite by changing the chemical state of aluminum

A new environment-friendly bentonite intercalation composite was successfully obtained from alumina sol intercalation. This process used industrial grade pseudo boehmite as the aluminum source and provided with the advantage of zero emission of acidic wastewater. The bentonite intercalation composite was investigated by XRF, ICP, XRD, FT-IR, BET, and pyridine-FTIR. Results indicated that the basal spacing was enlarged from 14.72 to 15.60 Å; the specific surface area increased by 128%; and the total acid content increased from 65.32 to 245.76 μmol/g. The catalytic activity of this composite was tested by alkylation of aromatics with olefins. The results show that the weak Lewis acid generated by extra-framework aluminum and specific surface area play a decisive role, while weak Brønsted acid site is not the active site for this alkylation reaction.     

One-step synthesis of new aluminum hydrides bearing a highly sterically hindered acenaphthene-1,2-diimine ligand

1. Download : Download high-res image (166KB)
2. Download : Download full-size image

     

Unbridged bidentate aluminum complexes supported by diaroylhydrazone ligands: Synthesis,structure and catalysis in polymerization of ε-caprolactone and lactides

A series of novel diaroylhydrazone aluminum complexes have been synthesized and well-defined structurally, and their catalytic performance in the polymerization of ε-caprolactone and lactides have also been evaluated. Complexes [(L^1–4)₂AlMe] ( 1 – 4 ) {[L¹ = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCOC₆H₅], [L² = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCO(C₆H₄–4-OCH₃)], [L³ = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCO(C₆H₄–4-Br)] and [L⁴ = (2-OMe-C₆H₄)CH=NNCO(C₆H₄–4-^tBu)]} were prepared through treatment of AlMe₃ with the corresponding proligands L^1–4H in molar ratios of 1: 1 or 1: 2. Chemical structures of all the complexes were well-defined by elemental analysis, NMR spectra as well as single-crystal X-ray study. Complexes [(L^1–4)₂AlMe] ( 1 – 4 ) in this work represent the first examples of aluminum complexes of aroylhydrazone ligands with crystallographic characterization. Specifically, they are all in monomeric form with a penta-coordinated aluminum center, including two approximately co-planar five-membered metallacycles with aluminum. Introduced bulky tert-butyl substituents in aroylhydrazone ligands could affect the geometry around the central metal which is a distorted square-based pyramid in complexes 1 – 3 while being a trigonal bipyramidal in complex 4 , thus affecting their catalytic behaviors. The complexes can successfully catalyze the ring-opening polymerization of ε-caprolactone and _L-lactide under mild conditions without any activator. In addition, complexes 1 – 4 could also polymerize rac-lactide, affording atactic polylactides with high conversions and good controllability in relatively short reaction time.     

Asymmetric Carboxycyanation of Aldehydes by Cooperative AlF/Onium Salt Catalysts: from Cyanoformate to KCN as Cyanide Source

Asymmetric 1,2-additions of cyanide yield enantioenriched cyanohydrins as versatile chiral building blocks. Next to HCN, volatile organic cyanide sources are usually used. Among them, cyanoformates are more attractive on technical scale than TMSCN for cost reasons, but catalytic productivity is usually lower. Here, the development of a new strategy for cyanations is described, in which this activity disadvantage is overcome. A Lewis acidic Al center cooperates with an aprotic onium moiety within a remarkably robust bifunctional Al–F–salen complex. This allowed for unprecedented turnover numbers of up to 10⁴. DFT studies suggest an unexpected unique trimolecular pathway in which the ammonium bound cyanide attacks the aldehyde, which itself is activated by the carbonyl group of the cyanoformate binding to the Al center. In addition, a novel practical carboxycyanation method was developed that makes use of KCN as the sole cyanide source. The use of a pyrocarbonate as carboxylating reagent provided the best results.